The Headphone - Connect The Headphone via Bluetooth
In order to enjoy music or other audio content on The Headphone, you need to pair it with a Bluetooth enabled device (e.g. your Smart Phone) via Bluetooth Classic. After the device has been paired and connected once, the Headphone will automatically re-connect the next time you turn it on.
How to pair with a new device
To pair and connect with a new device the Headphone must be OFF.
- Before you turn The Headphone ON make sure that Bluetooth is enabled on your phone. (check your phones Bluetooth settings)
- To start pairing, hold the
for 3 sec until you see the right LED blinking and/or you hear the pairing-sound.
- Your Headphone will now be visible as "BRAGI HP ##" in your phones Bluetooth devices list.
- Select The Headphone and wait until the connection has been established. Depending on the device you want to connect, the pairing process can take several seconds.
- When successfully connected, the Right LED will turn OFF and/or you will hear a confirmation-sound on the Headphone.*
Your headphone can remember up to 4 different paired devices.
*If no connection is established within 2 minutes, the Headphone will automatically power off to save power
Re-connect to a previously paired device
- Before you turn The Headphone ON make sure that Bluetooth is enabled on your phone. (check your phones Bluetooth settings)
- To turn The Headphone ON, hold the
for 1 sec until you see the Right LED lighting up and/or you hear the startup sound.
- The Headphone will now start looking for devices it was previously connected to and try to re-establish a connection.
- When successfully connected, the Right LED will turn OFF and/or you will hear a confirmation-sound on the Headphone. *
*If no connection is established within 2 minutes, the Headphone will automatically power off to save power